ES457

4G Low Cost Pet GPS Tracker with Vibration

  • Multiple working modes (power consumption from low to high)

One report per day (standby time up to 6 months)

Tracking only when pet is away from home (detect Home-WiFi)

Tracking only when moving is detected

Tracking with long interval with GPS/MCU/LTE in sleep mode at most times

Tracking in real-time

  • Bluetooth

  • WiFi positioning

  • Low battery alarm

  • Storing messages

  • Waterproof

  • Geofence

  • OTA (Over-the-air)

  • Protocol: HTTP/TCP/UDP/SMS/MQTT


ES457 is a mini waterproof GPS tracker with long standby time that can be used for both person
and pet. It can last 6 months with one report per day mode. It supports intelligent modes such
as Home-WiFi mode (no tracking at home), vibration mode (no tracking if the person or pet is
not moving around). User can choose propriate mode to balance between standby time and
real-time tracking. The person or pet can also be tracked by WiFi positioning where GPS
signal is not available.

LTE & GSM Specifications

Operating Band

Cat M1: 

LTE-FDD: 

B1/B2/B3/B4/B5/B8/B12/B13/B18
B19/B20/B25/B26/B27/B28/B66/B85* 

Cat NB2:

LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18
B19/B20/B25/B28/B66/B71/B85*


General Specifications

Dimensions

40mm*50mm*16mm

Weight

36g

Battery Capacity

680mAh

Supply Voltage

3.4V~4.2V 

Power Consumption

-Active mode:<72mA@4VDC

-Power saving mode:<4mA@4VDC

-Deep Sleep Mode:<10μA@4VDC

Operation Temperature

-20 to 65

Storage Temperature

-20 to 65

LTE Module

Quectel BG77

Antenna

Built-in cellular antenna and GPS antenna

Charging Method

Magnetic charging


GPS Specifications

Sensitivity

Tracking: -157dBm

Position Accuracy (CEP 50)

<2.5m (Open Sky)


Interfaces

Button

Reset

LED Indicators

2 for GPS, cellular and charging status

SIM Card

Nano SIM(4FF)


Feature list

Tracking

Send GPS information to server with configurable report interval

Power Saving by Report Interval

1.LTE and GPS will be shut down at most times in one report per day mode

2.LTE, GPS and MCU in sleep mode in long report interval (e.g. >3 minutes) mode

3.LTE, GPS and MCU in active mode in short report interval (< 3 minutes) mode

Home WiFi Mode

Turn off GPS if Home-WiFi is found (pet is at home) to save power consumption

Vibration Mode

Report location information only when moving is detected

Bluetooth

BLE can be used to search for a pet within a short distance and also to be used to send
command to the device

WiFi Positioning

Report WiFi MAC address when GPS signal is not available

Low Battery Alarm

Send alarm when battery voltage is low

Storing Messages

Store messages if out of cellular coverage

Geofence

Support multi circle and polygon geofence setting

OTA (Over-the-air)

Firmware can be remotely upgraded

Protocols

HTTP/TCP/UDP/SMS/MQTT