ES426S

Direct to Cell (D2C) & 4G (CAT.1) Asset GPS Tracker

  • Direct to cell (D2C)

  • Multiple working modes (power consumption from low to high)

One report per day (standby time up to 5 years)

Tracking only when moving is detected

Tracking at long interval with GPS/MCU/LTE in sleep mode at most times

Tracking in real-time

  • Long standby time

  • Trip start and trip end

  • Drop alarm

  • Vibration alarm

  • Low battery alarm

  • LBS positioning

  • Built-in magnets

  • Storing messages

  • Waterproof

  • Geofence

  • OTA (Over-the-air)

  • Protocol: HTTP/TCP/UDP/SMS/MQTT


ES426S is a 4G&D2C (LTE Cat.1) asset GPS tracker based on Starlink Direct-to-Cell (D2C) satellite technology, which allows the device to connect directly to the satellite in remote areas where terrestrial networks are unavailable or unreliable. Yet, in areas with terrestrial network coverage, the device can still communicate via ground-based cell towers. Equipped With a 7800mAh battery, it can last 5 years in daily reporting mode. Vibration mode is useful for the applications that do not require position information when stationary, saving data communication and power consumption. Thanks to its embedded magnets, ES426S can be easily installed to many objects with iron surface.


LTE & GSM Specifications

Operating Band

CAT.1

LTE TDD: B1/B2/B3/B4/B5/B7/B8/B12/

B13/B18/B19/B20/B25/B26/B28/B66

LTE TDD: B34/B38/B39/B40/B41


General Specifications

Dimensions

86mm*62mm*33mm

Weight

286g

Battery Capacity

7800mAh

Supply Voltage

3.3VDC~4.2VDC

Power Consumption

Active mode:<50ma@4VDC (mode 6)

Power saving mode:<20mA@4VDC

Deep sleep mode:<55μA@4VDC

Operation Temperature

-20℃ to 65℃

Storage Temperature

-20℃ to 65℃

Antenna

Built-in cellular antenna and GPS antenna

Charging Method

USB charging


GPS Specifications

Sensitivity

Tracking: -157dBm

Position Accuracy (CEP 50)

<2.5m(Open Sky)


Interfaces

LED Indicators

3 for GPS, cellular and charging status

SIM Card

Micro SIM(3FF)


Feature list

D2C Real-time Tracking

High-speed, low-latency, track and report vehicle data in remote areas devoid of terrestrial network coverage

Power Saving by Report Interval

1.LTE and GPS will be shut down at most times in one report per day mode

2.LTE, GPS and MCU in sleep mode in long report interval (e.g. >3 minutes) mode

3.LTE, GPS and MCU in active mode in short report interval (< 3 minutes) mode

Long Standby Time

It can last 5 years under one report per day mode with 7800mAh battery

Drop Alarm

Light sensor is used to detect the drop/detach from the tracking object

Vibration Mode

Report location information only when moving is detected

LBS Positioning

Report Cell ID info when GPS signal is not available

Built-in Magnets

Embedded with magnets, it can easily be installed to vehicle, trailer, container for asset tracking

Low Battery Alarm

Send alarm when battery voltage is low

Storing Messages

Store messages if out of cellular coverage

Geofence

Support multi circle and polygon geofence setting

OTA (Over-the-air)

Firmware can be remotely upgraded

Protocols

HTTP/TCP/UDP/SMS/MQTT



　

ES426S-Datasheet.pdf